To display or modify the PDM specific generation parameters, do the following:
Display one of the tabs in the LDM/PDM screen:
In the Generation list box, select the generation type AS/400 native (except for the Join entities tab).
Select the Generation parameters option in the PDM menu of the LDM/PDM screen.
Note: This dialog box can also be accessed in the case of AS/400 native generation by clicking the Generation parameters button in the generation dialog boxes for logical entities, accesses and join entities.
Check boxes
Reference to field ref. file
Checked |
The AS/400 field reference file will be generated (file fields are generated with REFFLD keywords). |
Not checked |
The AS/400 field reference file will not be generated. |
Important: this check box only appears for logical entities.
Altern. sequence
In order to use a specific alternate sequence table, check this box and fill in the fields below.
Data entry
Table name
Name of the AS/400 table in which the alternate sequence is located.
Mandatory entry if the Altern. sequence box was checked.
Library
Name of the AS/400 library in which the table is located.
Buttons
Enter (validation)
This button validates the modifications made and closes the dialog box.
Cancel
This button closes the dialog box without validating the modifications made.
Keyboard shortcut: Esc.